PRODUCT DETAILS
*Features:*
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
• Uses the cars factory sensors
• Supports Honda’s VTEC and VTC Control
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE) or Injection time
• OBD II Code Storing & Malfunction Indicator Light (MIL) Control
(Access through laptop only )
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port
*Factory Inputs/Outputs: (dependent on make/model)*
• 4/6 x Fuel Injector outputs
• 4/6 x Ignition outputs
• Tacho, Boost Control, AC Clutch Relay, Idle Control
• Knock Detection Sensor, MAP Sensor, Narrowband Oxygen sensor
• Coolant Temperature sensor, Vehicle Speed Sensor, AC Clutch Relay Idle Control
• Air Temperature sensor, Power Steering Input, 4WD Switch, Throttle Position Sensor
• Variable CAM Timing (VCT), VTEC, N-VCT ( Nissan Variable CAM Timing Control), MIVEC Control
• Thermo Fan, Check Engine Light, Fuel Pump
*Expansion I/O*:*
• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital pulsed output
*Optional auxiliary harness required to be purchased Haltech Part # HT040003
*Functions:*
• Knock Control
• Long Term Fuel Trim
• VTEC on Injection / Ignition
• VTEC on CAM
• Closed Loop O2 Control
• Decel Cut
• Over Boost
• Rev Limiter
• Closed & Open Loop Boost Control
• Gear Setup
• Transient Throttle Enhance
*Correction Tables: Fuel Ignition Boost:*
• Cranking
• Air Temp Target Correction
• Coolant Temperature Correction
• Map Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1*
• Generic Correction 2*
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start
* Generic Correction tables have user definable axis
*Miscellaneous:*
• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing
*Physical Dimensions:*
ECU Dimensions Length: 154-210mm
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)
*Transmission:*
• Manual Only (Automatic not supported)
*The Platinum Pro Plug-in Kit includes:*
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
• Uses the cars factory sensors
• Supports Honda’s VTEC and VTC Control
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE) or Injection time
• OBD II Code Storing & Malfunction Indicator Light (MIL) Control
(Access through laptop only )
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port
*Factory Inputs/Outputs: (dependent on make/model)*
• 4/6 x Fuel Injector outputs
• 4/6 x Ignition outputs
• Tacho, Boost Control, AC Clutch Relay, Idle Control
• Knock Detection Sensor, MAP Sensor, Narrowband Oxygen sensor
• Coolant Temperature sensor, Vehicle Speed Sensor, AC Clutch Relay Idle Control
• Air Temperature sensor, Power Steering Input, 4WD Switch, Throttle Position Sensor
• Variable CAM Timing (VCT), VTEC, N-VCT ( Nissan Variable CAM Timing Control), MIVEC Control
• Thermo Fan, Check Engine Light, Fuel Pump
*Expansion I/O*:*
• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital pulsed output
*Optional auxiliary harness required to be purchased Haltech Part # HT040003
*Functions:*
• Knock Control
• Long Term Fuel Trim
• VTEC on Injection / Ignition
• VTEC on CAM
• Closed Loop O2 Control
• Decel Cut
• Over Boost
• Rev Limiter
• Closed & Open Loop Boost Control
• Gear Setup
• Transient Throttle Enhance
*Correction Tables: Fuel Ignition Boost:*
• Cranking
• Air Temp Target Correction
• Coolant Temperature Correction
• Map Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1*
• Generic Correction 2*
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start
* Generic Correction tables have user definable axis
*Miscellaneous:*
• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing
*Physical Dimensions:*
ECU Dimensions Length: 154-210mm
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)
*Transmission:*
• Manual Only (Automatic not supported)
*The Platinum Pro Plug-in Kit includes:*
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)